Material file · Solar PV
Sell solar PV cable from Texas arrays.
Sunlight-resistant 2 kV PV wire from array construction and service work in Ellis, Kaufman and the outer Metroplex, where connectors outlast the cable.
Solar work has moved east and south of Dallas as much as it has stayed in the city, and utility-scale arrays in Ellis and Kaufman counties generate the kind of cable surplus that never appears on a commercial job: long PV wire runs cut short, partial reels and connector-terminated lengths.
PV wire is built for the outdoors. Its jacket resists sunlight and moisture, which is exactly why a reel left outside for a season is not automatically ruined.
Buy quote request
Tell us what you have
Type, conductor, voltage class and how much is on hand. Photos can follow by text or email. A buyer reviews the lot before anyone talks about money.
Prefer to talk it through? 954-740-1983 · saleselectricalbuyers@gmail.com
01 Construction
What PV wire is
Single-conductor, 2 kV rated, cross-linked insulation with a sunlight-resistant jacket, made for direct burial and exposed routing on array structures. It is not the same as USE-2, although the two are sometimes used interchangeably in the field.
The print identifies the rating. Where the print has faded, the application and the connector type usually tell a buyer what they are looking at.
02 Condition
Connectors and cut lengths
Array work produces many short lengths with factory or field connectors fitted. Connectors are inspected but not counted as length, and a length that has been terminated at both ends is a specific piece rather than a reel.
Longer remainders from a home run are the better part of the lot. They are measured, photographed and kept separate from the short jumpers.
- Partial reels with the factory wrap intact.
- Home-run lengths cut at the array.
- Short jumpers with connectors fitted at both ends.
- Cable removed during a panel or inverter replacement.
03 Access
Outer-Metroplex logistics
Array sites are often on farmland or leased land with limited access, and a collection may need to reach a laydown area rather than a dock. Gravel, gates and ground condition are part of the plan.
Coil PV wire in even loops and tape the ends. Single-conductor cable tangles easily, and a tangled lot is measured slowly.
FAQ Seller questions
What sellers ask before they send a list
Answers describe how the buying desk works. They are not an offer, a rate or a promise of purchase.
Do you buy PV wire with connectors fitted?
Yes. Connectors are inspected and noted, but they are not counted as cable length. Short terminated jumpers are listed separately from continuous remainders.
Is PV cable the same as USE-2?
They are different constructions, though both are used outdoors. PV cable carries a 2 kV rating and a sunlight-resistant jacket; the print identifies which one a reel actually is.
Can sun-exposed PV cable be sold?
Often. The jacket is made for exposure. Condition is assessed on cracking, chalking and damage at the bends rather than on the fact that it was outdoors.
Do you collect from array sites outside the metro?
Where the volume justifies the run, yes. Laydown access, ground conditions and distance are confirmed before a date is agreed.
Buy quote request
Tell us what you have
Type, conductor, voltage class and how much is on hand. Photos can follow by text or email. A buyer reviews the lot before anyone talks about money.
Prefer to talk it through? 954-740-1983 · saleselectricalbuyers@gmail.com